Unique Technologies/High Performance Materials
Unique Technologies
Injection Needles, Vibration Motors/Haptics, Micro Oumps, Printer Components, Tact Switches/Membrane Switches, Injectors
Thickness
0.010-0.20mm *Contact sales if you need 0.20 mm-0.60 mm
Width
3.0-300mm
Length
COIL or SHEET less than 2000mm
This is the manufacturing range of coils and sheets we manufacture.
Chemical composition is in accordance with JIS SUS301.
Density
7.93 g/cm³
Specific Heat
502 J/(kg・K)
Electrical Resistivity
72 μΩ・cm
Young's Modulus
193 GPa
Thermal Expansion
16.9×10-6/K(0~100℃)
Thermal Conductivity
16.3 W/(m・K)
Melting Range
1380-1420 ℃
nanoSUS™ a stainless steel in which the crystal grain size of the material is refined to about 1μm. The control of microstructure contributes to improving various properties such as strength, fatigue properties, and workability."
"TOKKIN's uniquely designed production method for JIN™ brings you a material that combines high strength and excellent workability that cannot be obtained with ordinary manufacturing methods. The balance of Yield stress (YS) exceeds 35,000 MPa x Elongation (EL) is among the highest in the world."
This materials are possible to increase their hardness by rolling, they can be used as spring parts.
We offer not only thin stainless steel foils, but also propose the appropriate steel grade and temper depending on specific application and use requirements, such as strength, workablility, magnetism, and corrosion resistance.
Main features of TOKKIN 301 JIN:
(1)Achieving high strength and high ductility simultaneously.