Vibration Motors/Haptics, Consumer Electronics
Thickness
0.010-3.0mm
Width
3.0-300mm
Length
COIL or SHEET less than 2000mm
This is the manufacturing range of coils and sheets we manufacture.
Unless otherwise specified, we manufacture in accordance with JIS standards.
Overseas standards are listed as equivalent or similar to our materials, so please use them as a reference.
JIS
SUS430 (G4305)
UNS
AISI
S43000
430
EN
1.4016
ISO
4016-430-00-I, X6Cr17
GB
S11710, 10Cr17
Density
7.70 g/cm³
Electrical Resistivity
60 μΩ・cm
Young's Modulus
200 GPa
Thermal Expansion
10.5×10-6/K(0~100℃)
Thermal Conductivity
26.0 W/(m・K)
Melting Range
1480-1508 ℃
Magnetism
Strong
We can manufacture according to your desired hardness between annealed to full hardened as shown in the table below.
Some finishes may not be available depending on the thickness of the sheet, so please consult with us first.
*For ultra-thin foil, soft materials such as annealed or BA finish may not be applicable due to concerns about defects (folding, wrinkling, etc.).
Stainless steel is an alloy of iron (Fe) with at least 10.5% chromium (Cr) and is used in a wide range of applications because it has good properties in terms of corrosion resistance, strength, workability, and heat resistance.